EMAX Pressure Lubricated 15hp 2 Stage 3 Cylinder 44 CFM Reciprocating Air Compressor Pump- APP3Y1544TP

15hp 2 Stage 3 Cylinder 44 CFM Reciprocating Air Compressor Pump

29″ X 16″ X 22″

Flywheel 23″

 

SKU: APP3Y1544TP

Product Description

 

Features:

Pressure Lubricated

  • Solid cast iron 2-stage 3 Cylinder W design piston series pump, oil lubricated design to extend pump life, rated at up to 50,000 hours (based on B-10 bearing life rating)
  • Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability
  • Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life
  • Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability
  • Industrial grade ball bearing for maximum performance and extended pump life
  • Built-in head unloaders designed for continuous run applications
  • Bolt pattern: 6 7/8” X 12 3/8”
  • flywheel included on pump
  • Solid cast-iron cylinders, crankcase, flywheel, crankshaft, and valve plates
  • Large Steel Automotive-Type Filters – not plastic
  • Large site glass for viewing your oil level
  • dimensions of this pump are: 29” W x 16” D x 22” H
  • weight:  350Lbs.
  • includes oil
  • 77 DBA

The Difference:

                 Emax Compressor delivers overwhelming performance to ensure that they meet the needs of the most demanding environments. Our Pumps require less maintenance, service and downtime than any other compressors in the Air Industry’s. All our Products are designed with exacting tolerance and specifications to deliver all the power that is needed at the jobsite, garage or shop.

“Free Air”:

                This is our 15 HP, 3 Cylinder, 2-Stage, air compressor pump. The 15 HP air compressor pump will produce 35 CFM if ran with a 10HP motor at 600 RPM This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. We have this style compressor, 3 Cylinder, in factories, body shops, and many tough applications that we sold over 20 years ago. This pump runs COUNTER CLOCKWISE rotation as you are looking at the compressor fan or flywheel. This pump runs at a SUPER slow RPM of 650. Minimum RPM on this pump is 550. The belts are 3/4″ from the center groove to center groove. The Flywheel size is 23″.The reason this pump is so tough, is it is a 3-cylinder, or W design. With our unit, if you want to clean your valves, intake, or exhaust, you can take the valves out of the cylinder head by unbolting the valve retainer and just pull the valve right out of the head to inspect it. It is sealed with an aluminum washer under the valve seat…no head gasket to fool with when removing valves. Easy & Quick to take in and out!

Our  15 hp air compressor pump is ALL CAST IRON, (not aluminum).  It has solid cast iron cylinder, cylinder heads, crankcase, flywheel, crank, and forged steel connecting rods – not aluminum! 

Our 15 hp air compressor pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft.  This ensures good crank stability and long compressor bearing life.  Each cylinder is all cast iron with no sleeves or aluminum.  All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot.  This pump has 3 belt drive.  Many of the pumps you see on the market have one belt…this is three belt.  Three belt ensures better belt gripage and longer belt life.  This pump has head unloaders.  This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications.  Head unloaders are an air cylinder in each head.  When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode.  The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open.  This pulls cool air into the cylinder.  The cool air absorbs the heat in the pump and blows it back out the intake valve.  This is nice when you are sandblasting, etc., under heavy duty cycles. 

 

 

 

Product Features

CFM @ 100 PSI 44
Compressor Stage Two
Horse Power 15
Pump Material Solid Cast Iron
Pump Model APP3Y1544T
Dimensions LxWxH 29" X 16" X 22"
Product Weight 350
Bolt Pattern 6 7/8" x 12 3/8"
Flywheel DIMS 23"
Oil Capacity 2.5 Quarts

Reviews

Review EMAX Pressure Lubricated 15hp 2 Stage 3 Cylinder 44 CFM Reciprocating Air Compressor Pump- APP3Y1544TP.

Your email address will not be published.